Output attributes of area and ramp evaluation

1.  On the Evaluation menu, click > Result Lists > Area Results or Ramp Results.

Result attribute Long name

Short name

Description

Number of pedestrians (maximum)

NumPedsMax

Maximum number of pedestrians that were in the area, on ramp or stairs

Number of pedestrians (minimum)

NumPedsMin

Minimum number of pedestrians that were in the area, on ramp or stairs

Number of pedestrians (average)

NumPedsAvg

Average number of pedestrians that were in the area, on ramp or stairs

Number of stops

NumStops

Number of stops during the evaluation interval. A pedestrian counts as standing still if his speed is less than 0.2 m/s.

Number of pedestrians waiting for PT (maximum)

NumPedsWaitingPTMax

Maximum number of pedestrians who were waiting for a PT vehicle in the area, on the ramp or stairs

Number of pedestrians waiting for PT (minimum)

NumPedsWaitingPTMin

Minimum number of pedestrians who were waiting for a PT vehicle in the area, on the ramp or stairs

Number of pedestrians waiting for PT (average)

NumPedsWaitingPTAvg

Average number of pedestrians who were waiting for a PT vehicle in the area, on the ramp or stairs

Walk-out count

WalkOutCnt

Number of pedestrians leaving the construction element Pedestrians from pedestrian inputs and pedestrians alighting from PT vehicles are not counted.

Density

Density

Pedestrian density in area, on ramp or stairs

Walk-in count

WalkInCnt

Number of pedestrians walking on construction element Pedestrians from inputs and pedestrians alighting from PT vehicles are not counted.

Density experienced

DensityExp

Pedestrian density experienced within the perception radius of a pedestrian: Number of other pedestrians within a radius around the pedestrian (this pedestrian is not counted). Calculated based on the pedestrian movements within the current time step. Therefore, it does not have a value in the first time step. Does not take into account pedestrians in the time step who are deleted at the end of this time step.

Area

Area

in Area evaluation results list only: area number

Speed

All types

Speed(All)

Average pedestrian speed, all pedestrian types, is calculated as the harmonic mean

Speed variance

SpeedVar

Vectorial speed differences of all pedestrians within the personal environment radius of their own speed (Selecting network settings for pedestrian behavior)

Nearest neighbor distance (maximum), (minimum), (average)

NearNeighbDistMax, NearNeighbDistMin, NearNeighbDistAvg

 Maximum, minimum and average distance to the center of the pedestrian to which the distance is lowest.

Ramp/Stairs

Ramp

in Ramp evaluation results list only: ramp or stairs number

Stop delay (total)

StopDelay Tot

Total standstill time of pedestrians during the evaluation interval. A pedestrian counts as standing still if his speed is less than 0.2 m/s
Simulation run SimRun

Number of simulation run

Time interval

TimeInt

Duration of the evaluation intervals in which the data is aggregated

If for areas, you selected the Queues attribute, you may additionally output the following area results attributes via queues:

Queue length (maximum)

QueueLenMax

Length and time information on the queues

Queue length (minimum)

QueueLenMin

Queue length (average)

QueueLenAvg

Time in queue (maximum)

TmInQueueMax

Time in queue (minimum)

TmInQueueMin

Time in queue (average)

TmInQueueAvg

Superordinate topic:

Configuring evaluations of the result attributes for lists