Pedestrian network performance: Displaying network performance results (pedestrians) in lists
You can show pedestrian specific attributes of the entire network compiled in lists.
Via the COM Interface, you can show and access user-defined attributes in the Network Performance (Pedestrians) Results list. User-defined formula attributes are shown, if you use the subattribute Simulation run. User-defined attributes are saved when you save the network file.
By default, the data for all pedestrian classes is entered together. You can also show the data for certain pedestrian classes separately in the evaluation (Configuring evaluations of the result attributes for lists).
You can save the following data and data formats:
| Output | ASCII file | MDB table |
Attribute file from attribute list |
|---|---|---|---|
|
Aggregated data |
- |
- |
|
|
Raw data |
- |
- |
- |
- Show result attributes in attribute lists (Displaying result attributes in attribute lists)
- Show result attributes in a result list (Showing result attributes in result lists)
Network performance results for pedestrians
All attributes take into account the pedestrians who have already left the network or reached their destination and the pedestrians who are still in the network at the end of the evaluation interval.
The results list Network performance results for pedestrians contains the following attributes:
| Result attribute Long name |
Short name |
Description |
|---|---|---|
|
Simulation run |
SimRun |
Number of simulation run |
|
Time interval |
TimeInt |
Duration of the evaluation intervals in which the data is aggregated |
|
Pedestrians (added) |
PedEnt |
Pedestrians that have newly been inserted into the network |
|
Pedestrians (arrived) |
PedArr |
Pedestrians arrived: Total number of pedestrians who have already reached their destination and have been removed from the network before the end of the simulation. |
|
Pedestrians (active) |
FgAct |
Total number of pedestrians in the network at the end of the simulation. Pedestrians arriving PedArr (Pedestrians (arrived)) and pedestrians not used in the network are not included in the attribute Pedestrians (active). |
|
DichDensity (average) |
DensAvg |
Average pedestrian density: ratio of pedestrians in the network to walkable areas. |
|
Speed (average) |
SpeedAvg |
Average speed [km/h] or [mph] Total distance DistTot / Total travel time TravTmTot |
|
Flow (average) |
FlowAvg |
Product of current speed, averaged over all pedestrians and the current density |
|
Travel time (average) |
TravTmAvg |
Average travel time of pedestrians traveling within the network or who have already been removed from the network. |
|
Flow towards destination (average) |
FlowToDestAvg |
Product of current speed, averaged over pedestrians and current density, accounting for static potential and position of each pedestrian. |
|
Speed towards destination (average) |
SpeedToDestAvg |
Average speed [km/h] or [mph] Total distance DistTot / Total travel time TravTmTot accounting for the static potential and position of each pedestrian |
|
Stops (average) |
StopsAvg |
Average number of stops per pedestrian: Total number of stops / (Number of ped in the network + number of ped that have arrived) |
|
Delay stopped (average) |
DelayStopAvg |
Average time of stop |
|
Normalized Speed (average) |
NormSpeedAvg |
Ratio of actual speed over desired speed, averaged over pedestrians and time steps. |
Superordinate topic:
