Attributes of static 3D models
Attributes of static 3D models may also be changed during a simulation run.
1. On the Lists menu, click > Graphics & Presentation > Static 3D Models.
The Static 3D Models list opens.
By default, you can edit the list (Using lists).
|
Note: In lists, you can use the |
The list contains, amongst others, the following attributes:
| Short name | Long name | Description |
|---|---|---|
| ModelFilename | Model filename |
Name of *.v3d file of the static 3D model |
| Level | Level |
Level at which the static 3D model lies |
| CoordX | Coordinate (x) |
Coordinate (x) of the position of the static 3D model in the network |
| CoordY | Coordinate (y) |
Coordinate (y) of the position in the network |
| CoordZOff | Coordinate (z-Offset) |
Base height of the static 3D model across the level |
| Scale | Scale |
Zoom in or out of the static 3D model in the Network editor, default value 1 |
| YawAngle | Yaw angle |
Yaw angle: angle of rotation around z axis |
| PitchAngle | Pitch angle |
Angle of rotation around the y-axis |
| RollAngle | Roll angle |
Angle of rotation around the x-axis |
| State | State |
Number of the desired state in which the static 3D model should be displayed, if the static model has different states (Defining 2D/3D models). |
Superordinate topic:
Information on editing:
