Attributes of pedestrian inputs

The Pedestrian Inputs list opens when you insert the network object, if automatic opening of a list after object creation is enabled (Right-click behavior and action after creating an object).

1.  From the Lists menu, choose Pedestrian traffic > Inputs.

The Pedestrian inputs list opens.

By default, you can edit the list (Using lists).

The attribute and attribute values of this network object type are shown in the list on the left, which consists of two coupled lists.

Tip: To open coupled lists for a network object type, from the Lists menu, choose > <Name network object type>.

The list on the left may include the following attributes:

Column	Description
No	Unique number of the pedestrian input
Name	Name of the pedestrian input
Area	Name of the area to which the pedestrian input was added
Volume(0)	Volume: number of pedestrians per hour and not per time interval
Pt	Coordinates of the circle of the pedestrian input
ShowLabel	Show label: If this option is not selected, the label for the pedestrian input is not displayed, even if the label for all pedestrian inputs is selected.

2.  If you want to change the time interval for a pedestrian input, right-click the desired entry in the Pedestrian Inputs list.

3.  In the context menu, select Edit Time Intervals.

The Time Intervals list opens (Defining time intervals for a network object type).

Note: In lists, you can use the  Attribute selection icon to show and hide attribute values (Selecting attributes and subattributes for columns of a list).

Showing and editing dependent objects as relation

1.  In the list on the left, click the desired entry.

The list on the right contains attributes and attribute values of network objects, and/or base data allocated to the network object selected in the list on the left (Using coupled lists):

Pedestrian Volumes By Time Interval list

2.  Enter the desired values.

Column	Description
Cont	Continued: Adopts the volume of the previous interval, if several time intervals for pedestrian inputs have been defined. The first time interval is therefore always deactivated. The option is not selected: The cells are white and are only valid for this interval. The option is selected: The cells are gray and are valid for the period of the combined intervals. Only the last cell, for which the Cont attribute is not selected, can be edited. When this option is selected, a change in volume is adopted for all the following cells.
TimeInt	Time interval: Start and end of the interval in simulation seconds (Defining time intervals for a network object type).
PedComp	Pedestrian composition (Defining pedestrian compositions)
Volume	Volume: number of pedestrians per hour and not per time interval
VolType	Volume type: Stochastic: Stochastic variations of the number of pedestrians may occur. The cells are white. Exact: Exactly the specified number of pedestrians are generated and used. The cells are yellow.

3.  If you want to allocate additional volumes to other time intervals for the selected pedestrian input, right-click on the Pedestrian Volumes By Time Interval list.

4.  From the shortcut menu, choose Add.

The next defined time interval will be added.

5.  Enter the desired values.