Defining dwell time according to dwell time distribution
1. Define the PT line, the PT stop and at least one dwell time distribution (Using time distributions).
2. On the Network objects toolbar, click Public Transport Stops or Public Transport Lines.
3. In the network editor, right-click the PT stop.
4. From the context menu, select Edit PT Line <No. > PT Stop <No.> PT Pass <No.>.
The PT Line Stop window opens.
5. In the Dwell time section, select Distribution.
6. Make the desired changes:
Element |
Description |
---|---|
Active |
|
Skipping possible |
SkipPoss: |
Departure time offset |
DepOffset: Departure time defined according to timetable (Editing a PT line stop) |
Door lock duration before departure |
DoorLockDurBefDep: This dwell time of the PTV vehicle is the time until departure of the vehicle after the doors have been fully closed. Default 1.0 s |
Dwell time |
Dwell time definition (DwellTmDef). All settings for the dwell time apply for the line stops of a PT partial route. Distribution and Calculation are always available if the public transport stop is not allocated a pedestrian area with Public transport usage.
|
You can also show further attributes in the attribute list Public Transport Line Stops, e.g.: |
|
Door closure delay |
DoorClosDel: Time after which the last pedestrian has walked through doors until the doors begin to close. Default value 3.0 s. |
7. Confirm with OK.
Superordinate topic:
Calculating the public transport dwell time for PT lines and partial PT routes