Attributes of SC

The Signal Controller window opens when you define an SC and have selected that you want the program to automatically open the Edit dialog after object creation (Right-click behavior and action after creating an object). By default, only the Signal controllers list is opened.

Into the Signal Controller window, you enter attribute values for the signal controller. For a signal controller which has already been defined, you can call the window using the following function:

In the Signal Controllers list, double-click the row with the desired SC.

The network object may have additional attributes. You can show all attributes and attribute values of a network object in the Signal Controllers list. You can open the list via the following function:

From the Lists menu, choose > Intersection Control > Signal Controllers.

In the network objects list of the network object type, you can edit attributes and attribute values of a network object (Selecting cells in lists), (Using lists).

Every signal controller can have relations to other objects. This is why the attributes list is shown as part of a coupled list (on the left). On the Lists toolbar, in the Relations box, you can show and edit the coupled list with the attributes of the desired relation on the right (see below Showing and editing dependent objects as relation) and (Using coupled lists).

Note: In lists, you can use the Attribute selection icon to show and hide attribute values (Selecting attributes and subattributes for columns of a list).

Basic attributes of SC

The basic attributes of the network element are shown in the upper area of the window and in the list of network objects for the particular network object type.

Element	Description
No.	Unique number of the SC
Name	Description
Type	Control procedures for SC
Active	Enables or disables the SC during simulation
Cycle time	CycTm: Only for control procedures Siemens VA, TRENDS, VAP, VS Plus, as for these the cycle time is not set externally. Fixed: Duration of a cycle in seconds. Vissim also calculates the cycle second for the above control procedures. Variabel (CycTmIsVar): The controller provides Vissim with the relevant information on the active cycle second. In the signal times table and in the SC detector record, the scaling of the x-axis is based on this information.
Offset	Offset: The times of the first cycle and all others are reset and shifted back by the offset time in [s].

Under them, the following tabs are displayed:

Controller configuration: Select a procedure-dependent control file
Signal Times Table Config.: Configure signal times table that runs during the simulation (Showing signal times table in a window).
SC Detector Record Config.: Configure SC detector record for SC with external control procedure (Evaluating SC detector records).

For the control procedures Siemens VA, TRENDS, VAP AND VS-Plus, the Signal groups tab is displayed, as for them the signal groups are not set externally (Defining signal groups for Siemens VA, TRENDS, VAP, VS-Plus).

Showing and editing dependent objects as relation

The Signal Controllers list is displayed as the left of two coupled lists.

In the list on the left, you can select an SC. In the list on the right, you can show the objects assigned to it. Depending on the procedure type (Type attribute) used, there are the following restrictions:

Relations are not available for all procedure types.
Relations cannot be edited as attribute values with all procedure types.

1. On the list toolbar, in the Relations list, click the desired entry.

Detector attributes (Attributes of detectors)
Attributes of SC detector record configuration (Evaluating SC detector records)
Attributes of signal groups: Select Normal, Flashing, or Green arrow
Attributes of the signal times table configuration (Configuring signal times table on SC)
WTT file assigned (Other files)

The right-hand list is shown. If there is no assignment, only the column titles are shown.

Superordinate topic:

Using signal control procedures

Information on editing:

Defining SC and signal control procedures

Changing control procedures for SC type

Showing licensed signal control procedures