Controller attributes

Any controller selectable in the List layer name pop-up window is characterized by a set of attributes:

Attribute Group	Attribute	Description
ATTRIBUTES	Controller Id	Identifier of the controller.
	Name	Name of the controller.
	Coordination group	Identifier of the coordination group containing the controller.
	Net socket	The socket identifier associated with the controller.
STATUS	Status	Status of the controller. The admitted values are dependent on the specific controller that you are considering. If the controller is not active, the time of the LAST STATUS RECEIVED is shown.
	Cycle	Cycle time of the signal program.
	Current program	The set current signal program.
	Offset	Offset of the set signal program.
CONSOLE	Manual setting	Check-box: On: the combo-box Program where you can select the signal program is enabled. Off: the combo-box Program is disabled.
	Local optimization	Check-box: On: local optimization enabled Off: otherwise
	Area optimization	Check-box: On: area optimization enabled Off: otherwise